Yitong Technology Dongyue Aerated Panel Factory Concrete Core Cutting Machine

Product VideoY-tong technology concrete core cutting machine for aac panel plant made in Dongyue Product DescriptionY-tong technology concrete core cutting machine for aac panel plant made in DongyueAAC (Autoclaved aerated concrete) block Main raw materials of AAC are siliceous material (sand, fly ash and Silicon taili

Featured Products

Product Video

Y-tong technology concrete core cutting machine for aac panel plant made in Dongyue

 
Product Description

Y-tong technology concrete core cutting machine for aac panel plant made in Dongyue
AAC (Autoclaved aerated concrete) block Main raw materials of AAC are siliceous material (sand, fly ash and Silicon tailings) and Calcium materials (lime and cement) mixed with foaming agent (aluminum powder). It is the product of light porous silicate through the following processes: batching, mixing, pouring, hardening, cutting, autoclaving and curing etc. Because of large amount of well-distributed tiny pores after foaming, it is named autoclaved aerated concrete.
AAC Classification In general, it can be classified according to the types of raw materials, manufacture process and functions. Based on the shape of AAC products, it can be divided into: AAC blocks and AAC panels. It is a revolutionary material offering an unique combination of high durability and strength, low weight, excellent heat insulation, fire resistant, noise absorption, unprecedented build ability and superior ecological green features. In China, AAC is one of the light wall materials which was popularized and applied at the earliest and the most widely.

Y-Tong Technology Concrete Core Cutting Machine for AAC Panel Plant Made in Dongyue
Working process
Y-Tong Technology Concrete Core Cutting Machine for AAC Panel Plant Made in Dongyue
Y-Tong Technology Concrete Core Cutting Machine for AAC Panel Plant Made in Dongyue

 

Material dealing process
Put the fly ash or sand into the ball mill to mill via the conveyor belt, after milling, put the slurry into the slurry storage tank by slurry pump. 

Batching, mixing and pouring process

The lime, cement will convey by conveyor to the dry powder measure scale to scale separately. The slurry convey by slurry pump then to the automatic scale;the power and slurry put into the mixer,pouring into the mould.

Y-Tong Technology Concrete Core Cutting Machine for AAC Panel Plant Made in Dongyue
Y-Tong Technology Concrete Core Cutting Machine for AAC Panel Plant Made in Dongyue

Curing process

After slurry pouring into the mould, put the mould box into the curing room with 5070. After 2-3 hours curing,the blocks become solid

Cutting process

Using reversal crane carry the mould and block to demould on cutting cart. The cutting cart will take the block to level cutting machine,vertical cutting ,two sides cutting,and remove the top waste material.

Y-Tong Technology Concrete Core Cutting Machine for AAC Panel Plant Made in Dongyue
 

Autoclaved

Finished cutting using semi-product crane carry to the front of autoclave grouped,hoisting machine or dragger will drag steam trolley into autoclave to steam,it need 10-12 hours.

Finished block dealing

Finished product out of autoclave,with separting machine to separate layer by layer.

 
 

Package

Using finished block carry hanger clamp the finished product to package line on wooden pallets,after package, then by forklift transport the finished products to piled yard according to specifications to stack.

Packing&Delivery

1.General AAC block plant equipment transport with 40HQ container.

2.The ball mill transport with 40OT or transposrt with 40FR according the size.

3.The autoclave main body transport by car on port,and hoist on deck of ship.

4.Cutting machine usually transport with 40FR.

5.Our package with wooden box,suitable for sea transport.

 
Product Performance
 
 
Type
TU groove brick
Flat brick without groove
Length(mm)
600
600
Thickness(mm)
75,100,125,150,200,250,300
75,100,125,150,200,250,300
Height(mm)
240,300,400
240,300,400

AAC Block compression strength of cuber meter       

Volume density level
B06
B05
B04
desiccated density(kg/m3)
≤625
≤525
≤425
Strength level
A5.0
A3.5
A2.0
Drying shrinkage date
0.5
0.4
0.4
Freezing resistance
quality loss %
≤5.0
≤4.0
≤3.0
Strength after freezing(Mpa)
≥4.0
≥2.8
≥0.6
Dry coefficient of thermal conductivity
[W/(mk)]
≤0.16
≤0.14
≤0.12
Raw Material
 

Y-tong technology concrete core cutting machine for aac panel plant made in Dongyue material description
Fly-Ash:A lot has been said about this raw material in this Project Profile itself. But this Raw material is freely available in Thermal Power plants. There are no taxes on this item whatsoever. Transportation charges are only to be attended by the entrepreneur.
Sand (65-70%):  the core raw material of AAC product; the main resource of silica-aluminum components; correspond with JC409-91; the clay should less than 4%

Lime(12-20%):one of the main raw materials of fly ash AAC; the main effect is to provide efficient calcium oxide with cooperation of cement making calcium oxide react with SiO2Al2O3 in hot water then to produce calcium silicate hydrate. Therefore, lime is also the main resource of strength. Effective calcium oxide of lime should not less than 65%, over 80% is perfect and should accord with JC/T621-1996.


Cement(8-10%): This Project aims to utilize OPC cement as main binder material. It will give faster strength to the bricks, besides giving improved consistent quality. It also ensures a better cost effectiveness for the same. Using OPC will be a standardized practice. The other prime advantages of using OPC (compared to other binders) is it's easy availability locally through nationwide Retail Network of Cement Companies.

Gypsum(1-2%):Gypsum is the foaming regulator in AAC which dispels quicklime and postpones slurry's densification.CaSO4 should be more than 70%.


Aluminum Podwer(0.074%):it is the forming agent type and recommendation for supply depend on raw materials and mix formula

 
Our Company

DONGYUE MACHINERY GROUP PROFILE

Dongyue Machinery Group was built in 1994,and now Dongyue is a national large-scale designated building materials machinery manufacturer, a coalition of researching, producing and marketing, and services with registered asset of 234 million RMB, total asset of 1 billion RMB, total area of 1,332,000square meters, and over 1500 staff.

 
 
 
 
 
 
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours